全球近6000家客户的共同选择
ZCCUTTER achieves 60mm corrugated composite board cutting, with 10mm as the process threshold: 0-10mm uses a 90W electric oscillating knife; above 10mm uses a 10mm amplitude pneumatic oscillating knife with 1.0-1.5mm thickened blade. Complete process parameters and test data below.
| Flute Type | Typical Thickness | Common Applications |
|---|---|---|
| E-flute (single wall) | 1.1-1.8mm | Small packaging, inserts |
| B-flute (single wall) | 2.4-3.0mm | Medium cartons |
| C-flute (single wall) | 3.3-4.0mm | Outer packaging |
| A-flute (single wall) | 4.5-5.2mm | Heavy-duty cartons |
| BE-flute (double wall) | 3.8-4.5mm | Reinforced cartons |
| BC-flute (double wall) | 5.8-6.8mm | High-strength shipping boxes |
| ABC-flute (triple wall) | 11-13mm | Super heavy-duty packaging |
The packaging industry is accelerating plastic-free transition. Multi-layer corrugated composite boards (0-60mm and beyond) are gradually replacing traditional EPE/EVA foam inserts. The core customer question: How thick can corrugated board actually be cut?
| Thickness Range | Recommended Machine | Cutting Tool | Blade Spec | Applications |
|---|---|---|---|---|
| 0-10mm | ZCRA / ZCRB1410 | 90W electric oscillating knife | Standard blade | Standard carton prototyping, E/B/C flute |
| 10-60mm+ | ZCRB1410 / ZCRB2516 dual-knife alternating | 10mm amplitude pneumatic oscillating knife | 1.0-1.5mm thickened blade | Multi-layer corrugated inserts, heavy composite boards |
Process Warning: Board hardness characteristics dictate that thinner boards with more layers are harder to cut. Tool parameters and air pressure must be strictly matched.
Below are multi-layer corrugated composite board samples cut in the ZCCUTTER lab (10mm / 30mm / 50mm / 60mm):
| Sample # | Thickness | Cutting Tool | Cutting Speed | Precision |
|---|---|---|---|---|
| 01 | 10mm | 90W electric oscillating knife | 800mm/s | ±0.05mm |
| Sample # | Thickness | Cutting Tool | Cutting Speed | Precision |
|---|---|---|---|---|
| 02 | 30mm | 10mm pneumatic oscillating knife | 400mm/s | ±0.3mm |
| Sample # | Thickness | Cutting Tool | Cutting Speed | Precision |
|---|---|---|---|---|
| 03 | 50mm | 10mm pneumatic oscillating knife + 1.5mm thickened blade | 250mm/s | ±0.5mm |
| Sample # | Thickness | Cutting Tool | Cutting Speed | Precision |
|---|---|---|---|---|
| 04 | 60mm | 10mm pneumatic oscillating knife + 1.5mm thickened blade | 200mm/s | ±0.5mm |
The following video shows the ZCRB2516 dual-knife alternating machine processing 50mm multi-layer corrugated inserts in continuous operation, with dual knives working alternately without pause for tool changes:
ZCCUTTER achieves a maximum cutting thickness of 60mm (multi-layer corrugated composite inserts). 0-10mm uses a 90W electric oscillating knife; above 10mm requires a 10mm amplitude pneumatic oscillating knife with a thickened blade.
With properly matched tool and air pressure, cuts are clean with no visible delamination. If slight fraying occurs, reduce feed speed or increase air pressure to improve results.
Yes. 3A flute falls in the 10-13mm range and can be efficiently processed with a 10mm pneumatic oscillating knife and 1.0mm blade.